31
Front Panel Control - Switching
The AC-MX-88X can be switched from the front panel by first pressing the desired OUTPUT (bottom row)
button first, then by pressing the desired INPUT button (top row).
1.
Press the OUTPUT button (1 through 4) on the bottom row that corresponds with the OUTPUT
(Display, or Sink Device) you would like to send to a source.
2.
Once pressed, the front panel display will change to the SWITCH menu showing the current IN/OUT
routes. Press the corresponding OUTPUT button (top row) to set.
You can also use the arrow keys and navigate to SWITCH on the front screen display.
1.
Use the left/right arrows to select the OUTPUT press the OK button (the selection will turn red).
2.
With the selection now red press the desired OUTPUT button (1-4) that you want to route to that
INPUT.
Summary of Contents for AC-MX-88X
