manualshive.com logo in svg

AVProEdge AC-MX-88X, User Manual

Share
Download
AVProEdge AC-MX-88X User Manual Download Page 26

26

WebUI: System - Hardware

LCD Timeout -

 This adjusts the time the front panel display will stay lit up when a button is pressed.  

There are four setting available

Always on (Default)
15 Seconds

30 Seconds

45 Seconds

WebUI: System - Firmware Update Cont.

Once the firmware file has been uploaded, it will display all containing firmware files.  Here you can select individual firmware 

files to load or simply leave all files/options selected.  If the version currently installed not newer, then that update will be skipped 

automatically.

Once the progress bar hits 100% click the CLOSE button, the firmware upgrade process is complete.
Now you will want to go back and re-apply settings like INPUT/OUTPUT Labels, applied EDIDs, Video Scaler Settings, Audio 

Settings, etc.

Keypad Lock -

 Enable or Disable (default) the front panel Keypad 

Lock. 

MCU/Version - 

Lists the current Firmware Versions

UPDATE FIRMWARE -

 Check/upload firmware.

FACTORY RESET -

 Restores matrix to Factory Defaults

REBOOT -

 Reboots the AC-MX-88

Summary of Contents for AC-MX-88X


















































Reviews:

No comments

Brands by name

Popular brands

Load more brands