7
Receiver Ports
POWER 48V
-
2 Pin terminal connector. You can power at either the Transmitter or the Reciever. Pow-
er will be provided automatically over the Category cable to the other HDBaseT unit.
IR OUT/I-PASS
/
IR IN
- There are 3 options for IR (examples are under the section “IR CONFIGURA-
TION” Page 8/9 ).
1. IR OUT: For use with an IR EMITTER (3.5mm).
·
I-PASS: For use with a MONO 3.5mm cable directly connected to a control system to send IR
Signals to the remote end.
·
IR IN: For use with an IR Receiving Eye.
HDMI IN
- HDMI Input port (Type A).
HDBT OUT
- HDBaseT Output port (RJ45).
AUDIO IN
- 3.5mm Stereo / Mini Toslink Port (see the “EXTRACTED AUDIO”section on page 10 for
more details).
RS232
- 3 Pin Terminal Connector (see the “RS-232 CONFIGURATION” section on page 13 for more
details).
