14
Troubleshooting
·
Verify Power - Check that the power supply is properly connected and on an active circuit.
·
Verify Connections - Check that all cables are properly connected.
·
TX/RX Indicator Troubleshooting Lights - Pg. 5-6
·
IR Issues - Verify correct connections - P. 8-9
Note: Visibly flashing Emitters may not function properly, if you are experiencing issue try the
IR Cables that come in the box.
·
Lights indicate everything is good but still not getting a picture, this may be a bandwith lim-
itation. See Bandwith Chart below to verify the signal is not exceeding the bandwith of the
Extender kit (limited to 10.2Gbps).
Bandwith Chart
