Avonic CM63-IP, User Manual

Page: 33 / 80

www.avonic.eu
33
RS485 Communication Control:
The camera can be controlled via RS485, Half-duplex mode:
•
Baud rate: 2400/4800/9600/38400 bit/s.
•
Start bit: 1 bit.
•
Data bit: 8 bits.
•
Stop bit: 1bit.
• Parity bit: none.
Pan-Tilt will rotate to the maximum position of top right after the camera started, then it return
to the center, the process of initialization is finished. (Note: If the position preset 0 has been
stored, the position preset 0 will be called up after initialization) Then the users can control the
camera with commands in the command list.
Command List
See Appendix A