Avonic CM60-IPU, Manual

Page: 9 / 84

www.avonic.eu
9
Product Overview
The Avonic CM-series cameras are designed for fixed installations. Without concessions on
quality, these cameras are an affordable choice for many installations. The cameras are
equipped with a Panasonic CMOS sensor combined with a glass high-quality glass lens with
20x optical zoom. Control these cameras over RS232/485 with the Avonic CM-CON100 PTZ
controller or any third party controller that supports VISCA, Pelco-P/D protocols.
These high-quality conference video cameras, with resolutions up to 1080p/60 and h.265
encoded ultra-low bandwidth video streams , have adopted Panasonic’s HD CMOS sensor,
which produces high-quality images. The high SNR (55db) of the CMOS sensor combined with
2D and 3D noise reduction algorithms, effectively reduce the noise, even under low light
conditions. Supports HDMI and CVBS output with high effective transmission distances. Using
RS232/485 interface or over IP, all the parameters of the camera can be remote-controlled.
Features
• H.265 encoding support, enabling full HD 1080p/60 video stream by ultra-low
bandwidth.
•
Apply Panasonic's 1/2.7 inch, 2.07 million effective pixels high quality HD CMOS
sensor, can reach maximum Full HD 1920 x 1080 high resolution and achieve quality
image.
• The output frame rate up to 60fps in 1080P, up to 120fps output in 720P
•
AAC audio encoding, better sound quality and smaller bandwidth.
•
High SNR of CMOS sensor combined with 2D and 3D noise reduction algorithm,