Avonic CM55-VCU, User Manual

Page: 9 / 24

www.avonic.eu
9
Installation
Cable Connecting
Note
If preset 0 has been saved, after powered on,
camera moves to preset 0 automatically; if
preset 0 has not been saved, after powered
on, camera moves to Home position, where
both pan and tilt angle is zero and zooming
time is 1x.
Mounting
The camera has 4 installation types: desktop,
wall (optional), ceiling (optional) and pole
(optional) mount installations.
Note
Before installing, make sure there is enough
space to install the camera and its parts.
Make sure the installed place is strong and
safe enough to hold the camera and relative
parts, it is suggested that the installed place
can withstand 4 times the weight of the
camera and its relative parts
Desktop Mount Installation
1. Put the camera on a flat surface. In case the camera
has to be placed on an inclined surface, make sure the
cline angle is less than 15 degrees to ensure proper
pan /tilt operation.
Note

Take effective measures to avoid camera
from dropping.

Do not grab the camera head when carrying.

Do not rotate the camera head with hand. It
may cause malfunction to the camera.
Wall Mount Installation
(Bracket not supplied with camera)