AV-CON300
PTZ Camera Controller
1
The Avonic CM-COM300 is an advanced
PTZ camera controller. With this
controller, it is possible to control up to 50
cameras and using up to 10 presets per
camera.
The controller supports the Visca, Pelco-
D and Pelco-P protocol and can be
connected with RS232/485. The Avonic
CM-COM300 is therefore compatible
with the Avonic cameras as well with
other brands that support these
protocols.
Switch easily between auto and manual
focus, save and load presets, and
connect multiple controllers to multiple
cameras.
Features
•
Optical 3D joystick gives you a comfortable pan/tilt/zoom operation.
•
2 line backlit LCD display
•
Camera OSD menu operation
•
Quickly adjust the camera for a variety of automatic functions like focus, exposure,
white balance and brightness
•
VISCA protocol can be used to control up to 35 cameras
•
Pelco protocol can be used to control up to 50 cameras
•
PTZ and lens control speed can be adjusted through the control knob
Specifications
Comm. Interface
5x RS-485/RS-232 on RJ45 connector
Protocol
Pelco-D, Pelco-P, VISCA
Baud Rate
2400bps, 4800bps, 9600bps, 19200bps, 38400bps
Number of cameras
Up to 50
Joystick
3D-axis (Left/Right, Up/Down, Zoom In/Out)
Display
2 line LCD with backlight
Adjustment functions
Pan/Tilt, Zoom, Focus, Brightness, Iris, Gain, White Balance (Auto, One-Push,
Red/Blue Gain)
Number of presets
10 per camera
Tally Light
9-pin DSUB male output
Power
DC12V
Power Consumption
<2W
Working Temperature
0~40
℃
Storage Temperature
-20~+50
℃
Relative Humidity
≤90% (non-condensation)
Dimensions (LxWxH)
290mm x 180mm x 115mm
Net Weight
1.6 kg
