manualshive.com logo in svg

Avocent ESP-4 MI, Installer/User Manual, Page: 71 / 80

Share
Download
Avocent ESP-4 MI Installer/User Manual Download Page 71

  Appendices        

61

Table C.1: ESP-Install Program Commands

Command

Description

AUTO DEVICE ON|OFF

Enables or disables automatic responses for an unsigned driver. The 
default value is ON.

DEBUG=[0|1]

Enables (1) or disables (0) inclusion of addition debug information in the 
ESPinstall.log file.The default is enabled.

END

Designates the end of the installation/update commands for an ESP hub.

ESP

Designates the beginning of the installation/update commands for an 
ESP hub.

F<

port

>=NOFLUSH ON|OFF

Enables (ON) or disables (OFF) the NOFLUSH feature for the specified 
physical port.

F<

port

>=NOPURGE ON|OFF

Enables (ON) or disables (OFF) the NOPURGE feature for the specified 
physical port.

F<

port

>=SENDCOMMSTATUS 

ON|OFF

Enables (ON) or disables (OFF) the SENDCOMMSTATUS feature for 
the specified physical port.

F<

port

>=SENDMODEMSTATUS 

ON|OFF

Enables (ON) or disables (OFF) the SENDMODEMSTATUS feature for 
the specified physical port.

F<

port

>=TXDRAIN ON|OFF

Enables (ON) or disables (OFF) the TXDRAIN feature for the specified 
physical port.

GATEWAY=<

gateway

>

Gateway address, in dot notation. This command is required when 
installing an ESP hub that does not yet have an IP address and is not 
located on the local subnet.

I<port>=RS-232|RS-485|
RS-485RTS|RS-422

Interface type of the physical port. This command is valid only on multi 
interface units that support the specified interface type. For example, 
ESP-2 MI hubs support the RS-485 RTS interface, but ESP-4 MI hubs do 
not. See the hub’s documentation for more information.

IP=<

ip

>

IP address, in dot notation. This command is required when adding a hub 
or modifying a hub’s configuration.

MAC=<

mac

>

MAC address, in dash notation. This command is required when 
installing an ESP hub that does not yet have an IP address.

MASK=<

mask

>

Subnet mask, in dot notation. This command is required when installing 
an ESP hub that does not yet have an IP address and is not located on 
the local subnet.

ONEPORTOPTION

Enables the one port option. This command is valid only for 
ESP-2 MI hubs.

OPENPERSIST ON|OFF

Enables (ON) or disables (OFF) the persistent open feature for this 
ESP hub.

Summary of Contents for ESP-4 MI

















































































Reviews:

No comments