manualshive.com logo in svg

Avocent DSView, Installer/User Manual, Page: 315 / 358

Share
Download
Avocent DSView Installer/User Manual Download Page 315

  Appendices        

297

Managing SPC device sockets

Users with User level account privileges cannot change the power state of SPC device sockets. See 

Built-in User Groups

 on page 18 for more information.

Use the Power view to manage SPC device sockets attached to the switch. See 

Power view

 on 

page 292 for more information.

To display the Power view:

From the menu bar, select 

View - Power

.

-or-

From the side navigation bar, click 

Power

.

To refresh the Power view:

Select 

View - Refresh 

from the menu bar when the Power view is displayed.

To power up an SPC device socket:

1.

From the side navigation bar, select 

Power

. A list of SPC device sockets attached to the switch 

will appear in the content area.

2.

Select an SPC device socket that has not been powered up and select 

Tools - Power On

 from 

the menu bar.

-or-

Select an SPC device socket that has not been powered up and click the 

Power On

 

toolbar button.

-or-

Right-click on an SPC device socket that has not been powered up and select 

Power On

 from 

the shortcut menu.

The SPC device socket will power up and the icon for the SPC device socket in the content 
area will change.

To power down an SPC device socket:

1.

From the side navigation bar, select 

Power

. A list of SPC device sockets attached to the switch 

will appear in the content area.

2.

Select an SPC device socket that has not been powered down and select 

Tools - Power Off

 

from the menu bar.

-or-

Select an SPC device socket that has not been powered down and click the 

Power Off

 

toolbar button.

-or-

Right-click on an SPC device socket that has not been powered down and select 

Power Off

 

from the shortcut menu.

Summary of Contents for DSView







































































































































































































































































































































































Reviews:

No comments