manualshive.com logo in svg

Avocent DSView, Installer/User Manual

Share
Download
Avocent DSView Installer/User Manual Download Page 292

274

        DSView Installer/User Guide

Click the checkbox to the left of Audit Log Event at the top of the list to select all events listed 
in the window.

NOTE:

 Events may not be enabled unless they are already disabled.

3.

Click 

Enable

 to enable the selected events.

-or-

Click 

Disable

 to disable the selected events.

The Enabled Audit Log Events window will re-appear including the updated status of the 
listed events.

Retaining the Audit Log

By default, an audit log is retained for one week. However, you may specify a retention time of up 
to one year.

Audit log information is stored in the DSView software database and is replicated. Increasing the 
audit log retention time may impact the performance of your DSView software system. It is 
recommended that old audit log entries be archived to .csv files by scheduling tasks. See 

Managing 

Tasks

 on page 244 for more information.

To specify an audit log retention time:

1.

From the side navigation bar, click 

Log Retention

. The Audit Log Retention Time window 

will appear.

2.

Type a number of days (from 1-365) in the Days field, or select it using the drop-down menu.

3.

Click 

Save

 to save your changes. 

Configuring Email Notifications

NOTE:

 The Simple Mail Transfer Protocol (SMTP) must be configured to receive email notifications about 

audit events.

The DSView management software may be configured to send one or more users email 
notifications when events occur. Multiple events may be configured so that an email is sent to the 
defined users any time one of the specified events occurs. See 

DSView management software 

events

 on page 266 more information.

Customizing the Email Notifications window

The Email Subject column is always displayed in the Email Notifications window: You may add 
the From Address and To Address, using the Customize link. See 

Using the Customize link in 

windows

 on page 14 for more information.

Summary of Contents for DSView







































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands