Avocent DSView, Installer/User Manual, Page: 239 / 358

Chapter 8: Working with IPMI 1.5 Target Devices
221
Figure 8.2: Upper and Lower Threshold Values
Refreshing the IPMI Viewer window
To specify an automatic refresh rate for the IPMI Viewer window:
From the IPMI Viewer window, select one of the following refresh rates: 30 seconds, 60 seconds or
90 seconds.
-or-
Select Continuous to update in real-time the values that dynamically change in the IPMI 1.5 target
device BMC.
-or-
Select Never to prevent the gauges from automatically refreshing.
To refresh the IPMI Viewer window manually:
Select the Refresh button.
Closing an IPMI Viewer window
To close the IPMI Viewer window:
Select the Close button.
Displaying Sensor Information by Selecting an IPMI 1.5
Target Device
NOTE: To display IPMI 1.5 target device information, a user must be individually assigned rights or belong to a
user group assigned rights to the IPMI 1.5 target device using the Unit Access Rights window. See Changing
Unit Access Rights on page 91 for more information.
You may display information related to a supported IPMI 1.5 target device, including general
information about the target device, the target device LAN configuration, field replaceable units
Upper and lower threshold areas
appear in color.