manualshive.com logo in svg

Avocent DSView, Installer/User Manual

Share
Download
Avocent DSView Installer/User Manual Download Page 196

178

        DSView Installer/User Guide

Using Global and Personal Macros

NOTE:

 Macros may not be created, edited, copied or deleted if the DSR Remote Operations software is being 

used to connect to the DSR appliance viewing the target device. See 

DSR Remote Operations Software

 on 

page 289 for more information.

NOTE:

 You must have Appliance Administrator privileges to create and change Global Macros. See 

Built-in User 

Groups

 on page 18 for more information.

Three types of macros are available in the DSView management software. Exit macros are created 
within the DSView Explorer and are used by and located on DS1800 digital switches and DSR 
switches. See 

Defining exit macros

 on page 112 for more information.

The other two types, global macros and personal macros, are created and used by the Video 
Viewer. Global macros are created and maintained by users with administrative privileges and are 
stored on the hub server and any specified spoke servers. See 

Displaying and changing session 

settings on managed appliances

 on page 108 for more information.

NOTE:

 Global and personal macros may also be created in the Telnet/SSH applet window. Macros created 

using the Telnet/SSH applet window are not compatible with the Video Viewer and may only be used with target 
devices connected to CPS or CCM appliances.

Users may create personal macros for their own use. These macros can be accessed on the local 
computer using the Video Viewer window. Personal macros may be customized and grouped in 
any manner you wish with the exception of being included in a Global Macro group.

When a session is started in the DSView management software, global and personal macros are 
retrieved from the DSView software server. Then, when a Video Viewer window session is started, 
the macros are loaded. A user may choose to use either personal macros or global macros and 
switch between using them at any time during the session.

Both personal and global macros may be added to the Video Viewer window toolbar by assigning 
an icon to them using the Toolbar tab on the Session Options dialog box. A user may then execute 
the macro by clicking the button on the toolbar. See 

Changing the toolbar

 on page 163 for 

more information.

The Video Viewer window macro function allows you to:

•

Send multiple keystrokes to a device, including keystrokes that you cannot generate without 
affecting your local system, such as 

Ctrl-Alt-Delete

.

•

Send a macro from a predefined macro group. Macro groups for Windows, Novell and Sun are 
already defined.

•

Create, edit and delete your own macros. When you create or edit a macro, you may type the 
desired keystrokes or you may select from among several available categories of keystrokes. 
Each category contains a set of keystroke combinations. Selecting from the available 
categories and keystrokes saves time and eliminates the risk of typographical errors.

Since the DSView management software may be used to access different computer platforms, users 
may find it helpful to assign distinct macro groups to Global Macros or Personal Macros on 

Summary of Contents for DSView







































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands