Avocent DSR Series, Installer/User Manual, Page: 84 / 240

72
DSR Switch Installer/User Guide
3. Click Install DSR Remote Operation and follow the on-screen instructions .
Using the DSR Remote Operations software
To start the DSR Remote Operations software:
1. Establish a dial-up connection to the switch from the PC containing the DSR Remote
Operations software.
Windows displays a dialog box that prompts the user for a username and password when a
dial-up connection is established. It is not necessary to enter a username or password in the
dialog box. When this dialog box appears, click
OK to close the dialog box.
2. Once the connection has been established, select Start - Programs - Avocent DSView 3 - DSR
Remote Operations to start the DSR Remote Operations software on the PC. The Login dialog
box will appear. Log in using a valid username and password to establish a DSR Remote
Operations software session with the DSR switch over the modem link.
3. The switch will disconnect the modem connection if a user does not log in within the time
period specified by the authentication time-out value. The default authentication time-out
value (120 seconds) may be changed using the Terminal Applications menu.
The DSR switch will attempt to contact the DSView 3 software server to authenticate the user.
If the DSView 3 software server is unavailable, the switch will use its internal database to
authenticate the user.
4. Type the username and password to which you wish to connect and then click OK . If
authentication is successful, the DSR Remote Operations window will open.
NOTE: The switch will disconnect the modem connection if there is no activity on the modem connection for the
time period specified by the inactivity time-out value. The default inactivity time-out value (15 minutes) may be
changed using the Terminal Applications menu.
To exit the DSR Remote Operations software:
Select File - Exit from the menu.
Window features
When you have launched the software and successfully logged in, the DSR Remote Operations
window will display the list of DSView 3 software servers connected to the DSR switch. Figure
B.2 shows the DSR Remote Operations window areas. Descriptions follow in Table B.3.