Avocent AV Works, Installer/User Manual

Page: 81 / 144

Chapter 6: AVR AMP 69
-or-
Click
Cancel to exit the AMP without saving any changes.
To delete a user:
1. Click the Settings tab in the AVR AMP.
2. Select the Users category.
3. Select the user(s) to delete.
4. Click the
Delete button. You are prompted to confirm the deletion.
5. Click Yes to confirm the deletion.
6. Click Apply to save any changes without exiting the AMP.
-or-
Click
OK to save any changes and exit the AMP.
-or-
Click
Cancel to exit the AMP without saving any changes.
Locking and unlocking user accounts
When the security lock-out feature is enabled, and a user enters an invalid password five
consecutive times, that user’s account will be disabled for a specified number of hours, or until it is
expressly unlocked or the appliance is power-cycled. If a locked-out user tries to log in during the
lock-out period, an error message is displayed. A closed-lock icon appears next to the names of
locked-out users. Security lock-out, when enabled, applies to all user accounts.
An appliance administrator may specify the lock-out period. A user administrator may unlock only
user accounts; an appliance administrator may unlock any type of account.
When the security lock-out feature is disabled, no users will be locked-out.
NOTE: Disabling security lock-out has no effect on users who are already locked-out.
To enable or disable security lock-out:
1. Click the Settings tab in the AMP.
2. Select the User s category.
3. Enable the Enable Lock-outs checkbox. Enter the number of hours (1-99) in the lock-out
period in the Duration field.
-or-
Disable the E
nable Lock-outs checkbox.
4. Click Apply to save any changes without exiting the AMP.
-or-
Click
OK to save any changes and exit the AMP.
-or-
Click
Cancel to exit the AMP without saving any changes.