Avocent AV Works Installer/User Manual Download Page 19

Page: 19 / 144

CHAPTER

Installation and Startup

Getting Started

Before installing AVWorks software, refer to the following lists to ensure that you have all the
items necessary for proper installation.

Supplied with AVWorks software

•

AVWorks software CD

•

AVWorks Installer/User Guide

•

Download instructions

Supported operating systems

•

Microsoft

Windows

2000 Server and Workstation

•

Microsoft Windows NT

4.0 Server and Workstation

•

Microsoft Windows XP (Home and Professional)

•

Red Hat Linux

7.3, 8.0 and 9.0

•

Sun

Solaris™ 8.0 and 9.0

Hardware configuration requirements

AVWorks software is supported on the following minimum PC hardware configurations:
•

500 MHz Pentium III

•

256 MB RAM

•

10 or 100 BaseT NIC

•

XGA video with graphics accelerator

•

Desktop size must be a minimum of 800 x 600

•

Color palette must be a minimum of 65,536 (16-bit) colors

AVWorks software is supported on the following minimum Sun hardware configurations:
•

333 MHz Pentium Ultra SPARC-IIi

•

256 MB RAM

Summary of Contents for AV Works

















































































































































Search results

Summary of Contents for AV Works

Reviews:

Related manuals for AV Works

Brands by name

Popular brands

Avocent AV Works, Installer/User Manual

Search results

Summary of Contents for AV Works

Reviews:

Related manuals for AV Works

Brands by name

Popular brands