Avnet MSC C10-MB-EV, User Manual

Page: 25 / 48

MSC C10-MB-EV User Manual
25 / 48
4.7.1 LVDS EEPROM Socket
A serial EEPROM is connected to the signals LVDS_I2C_CK and LVDS_I2C_DAT to store
configuration data of the LCD.
This EEPROM can be assembled optionally or it can be disabled with a closed DIP-Switch
S2804 #4 to avoid conflicts with configuration EEPROM connected via the JILI connector.
Specification:

References: U1601

Connector: DIP8 socket

Pin-out: Refer to Table 6

Location: Refer to chapter 4.7 LVDS-Interface
Pin Signal name Function
1 A0 EEPROM Address 0 (PD 10k)
2 A1 EEPROM Address 1 (PD 10k)
3 A2 EEPROM Address 2 (PD 10k)
4 GND Ground
5 SDA Serial data
6 SCL Serial clock
7 WP Write protection (Ground, disabled)
8 VCC Power supply 3V3
Table 6 Pin-out LVDS EEPROM Socket