Avnet COM Express MSC C10M-BT User Manual Download Page 75 | Manualshive

Page: 75 / 90

background image

MSC C10M-BT / MSC C10M-BTC

User Manual

75 / 90

Bios and Firmware Update

This update procedure is for newer BIOS versions, V1.50 or later.

For older BIOS versions please see the relevant readme file or contact Technical Support.

Setup Controlled Update

Within BIOS Setup main menu there is a submenu “

MSC Firmware Update

” integrated to define settings

for BIOS updates and to start the update.

Control flags define the section of FLASH which needs to be updated (BIOS only, complete
FLASH, partial BIOS sections, etc.) and other options such as screen output, preserving DMI
data, etc.
The update file (a complete SPI firmware image) has to be stored at a fixed location within the
file system on a mass storage device. BIOS loads the file into RAM, performs optional security
checks and finally programs the data to the BIOS FLASH according to supplied control flags.

Supported mass storage devices (platform dependent): USB, SATA, eMMC
Supported file systems (platform dependent): FAT, EXT3, NTFS

Image location within file system: /Recovery/FlashImg.bin

-

To start the update make sure that the medium with the correct Bios stored is
connected.

-

In Bios section Main/MSC Firmware Update configure control flags as needed.
Then

enter “Start firmware Update”.

-

After Bios update is done system will reboot.



NOTICE: Do not reset or power-cycle the board during update !

«
...
73
74
75
76
77
...
»

Summary of Contents for COM Express MSC C10M-BT



























































































Reviews:

No comments

Related manuals for COM Express MSC C10M-BT

Brand: jbc Pages: 4

Brand: Kärcher Pages: 4

Brand: Magnescale Pages: 3

Brand: Nabco Pages: 35

Brand: PACH & COMPANY Pages: 4

Brand: Zodiac Pages: 12

Brand: National Instruments Pages: 34

Extra Free RZB-02

Brand: Zamel Pages: 2

Brand: Yamaha Pages: 2

Brand: Warner Electric Pages: 4

Brand: Carel Pages: 48

Controller CR100

Brand: Sonos Pages: 12

Brand: Zencontrol Pages: 2

Brand: Daikin Pages: 2

Brand: Advantech Pages: 3

Brand: Lab-T Pages: 17

Brand: Zander Aachen Pages: 44

Brand: 4D systems Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands