Installing Individual Software Components
32
FRITZ!X USB – 3 Software Installation
3.11 Installing Individual Software
Components
Certain software components may already be installed on
your computer, such as FRITZ!, for example. In this case you
may want to install only certain individual components from
the product CD. You can do so as follows:
z
To install the FRITZ!X USB driver software, follow the
instructions in the section for your operating system.
z
To install the FRITZ! communications software, start the
program SETUP.EXE in the directory SOFTWARE\FRITZ!\
<ENG> on the installation CD.
z
The AVM ISDN CAPI Port Driver is installed using the
SETUP.EXE file located in the SOFTWARE\CAPIPORT\
CAPIPORT.<OPERATING SYSTEM>\ ENG folder on the CD.
z
The FRITZ!X configuration software is installed by
running the SETUP.EXE file found in the SOFTWARE\
CONFIG\<ENG> folder on the CD.
z
Install ISDNWatch with number filter functions using the
SETUP.EXE file located in the SOFTWARE\TOOLS\
ISDNWATCH folder on the CD.
The CD_INFO.HTM file in the root directory of the FRITZ!X USB
CD lists the contents of the CD.
F!XUSB-e.book Seite 32 Mittwoch, 8. November 2006 2:23 14
