Configuring Internet Access for a Direct DSL Connection
FRITZ!Box
32
4.1
Configuring Internet Access for a Direct DSL Connection
See also the Help available in the user interface for assis-
tance in configuring the Internet access.
Using the
Configuration
Wizard
If you have connected the FRITZ!Box directly at the DSL port
and have account data from an Internet Service Provider at
your disposal, you can use the Configuration Wizard avail-
able in the user interface. With the Configuration Wizard all
of the necessary basic settings are performed in just a few
steps.
Manual
Configuration
If you would like to configure the Internet access without
the assistance of the Configuration Wizard, proceed as fol-
lows:
Keep the Internet access information you received from
your Internet Service Provider handy.
1.
Start a web browser.
2.
in the address field.
3.
Select the “Settings” menu.
4.
Select the the “Account Information” command from
the “Internet” menu.
5.
Select the connection type “Internet connection via
DSL” in the “Connection” area.
6.
In the “Operating Mode” area, select the “Use one In-
ternet connection for all computers (router)” setting.
7.
Your Internet access is defined either by means of ac-
count data (user name and password) or in accor-
dance with RFC 1483/RFC 2684.
–
If you require a user name and password for Inter-
net access, select the setting “Account information
required (PPPoE/PPPoA connection)”.
–
If your DSL Internet access does not require any ac-
count information, because the connection is es-
tablished via DHCP or static IP address (transpar-
ent bridging/bridged ethernet in accordance with
F!BoxFonWLAN-7170v2-e.book Seite 32 Freitag, 23. November 2007 3:41 15
