Connecting Telephone, Fax, Answering Machine
FRITZ!Box
26
Connecting
1.
Connect the longer, gray end of the cable to the socket
labeled “DSL/TEL”, located at the far left of the back
panel of the FRITZ!Box.
2.
Then insert the black plug into the appropriate jack of
your DSL splitter. If the plug does not fit into the split-
ter, connect the end of the cable to the black RJ45-RJ11
adapter included in the package and then insert the
adapter into the socket on the DSL splitter.
2.10 Connecting Telephone, Fax, Answering Machine
Connect your analog equipment to the FRITZ!Box so that
you can make telephone calls and fax using the Internet or
the fixed-line network.
Prerequisites:
If you would like to use your fixed line to make telephone
calls or fax, note the following requirements:
Connecting to an Analog Telephone
The ports “FON 1”, “FON 2” and “FON 3” on the FRITZ!Box
are available for connecting your analog terminal equip-
ment.
Use “
FON 1
” and “
FON 2”
to connect your analog
equipment directly to the FRITZ!Box.
“FON 3”
serves to connect analog terminal equipment
that is located further away to the FRITZ!Box, for in-
stance an additional telephone jack on a higher floor,
using the wiring at your location.
For fixed-line telephony via ISDN you must connect the FRITZ!Box
with the ISDN NT (see the section “Connecting to the ISDN Line”
on page 24).
In order to use the analog fixed-line network, the FRITZ!Box must
be connected with the analog fixed line (see the section “Con-
necting to the ISDN Line” on page 24).
F!BoxFonWLAN-7170v2-e.book Seite 26 Freitag, 23. November 2007 3:41 15
