FRITZ!Box
17
Connecting the Computer(s)
Connect the FRITZ!Box to the power supply as described be-
low:
Power Supply Unit
Remove the power supply unit from the FRITZ!Box package.
Connecting
1.
Connect the power mains adapter to the socket la-
beled “Power”, located at the far right of the back pan-
el of FRITZ!Box.
2.
Plug the other end into an AC power outlet.
The green “Power/DSL” LED will begin flashing after a few
seconds to indicate that the FRITZ!Box is ready for opera-
tion.
2.4
Connecting the Computer(s)
If you would like to surf the web using the FRITZ!Box or to
open the FRITZ!Box user interface, then you must connect a
computer with the FRITZ!Box.
A computer can be connected with the FRITZ!Box Fon WLAN
in two different ways:
using a LAN port of the FRITZ!Box
wirelessly via WLAN
One
computer can be connected to FRITZ!Box by only
one
of
these means.
One computer can be connected to each of the four LAN
ports of FRITZ!Box, and several computers can be connect-
ed with FRITZ!Box at the same time via WLAN.
The way a computer is connected to the FRITZ!Box is the
same regardless of the operating system on the computer.
All of the computers connected with the FRITZ!Box consti-
tute a network.
F!BoxFonWLAN-7170v2-e.book Seite 17 Freitag, 23. November 2007 3:41 15
