AVM Fritz!Box Fon WLAN7170 Installation, Configuration And Operation Download

Page: 136 / 140

WLAN Switch

FRITZ!Box

136

14.3 WLAN Switch

The FRITZ!Box Fon WLAN 7170 is equipped with a WLAN
switch on its rear panel.

The WLAN switch can be used to activate and deactivate
WLAN.

14.4 Technical Specifications of FRITZ!Box Fon WLAN 7170

Ports and Interfaces

DSL / fixed line

–

Standard ITU G.992.1 Annex A or Annex B (depend-
ing on the FRITZ!Box model)

–

Fixed line port for connecting to the analog net-
work or ISDN

two a/b ports for connecting two extensions via RJ11
sockets

one a/b port for connecting an extension using cable
clamps

one ISDN S

NT port

bus with support for ISDN telephony devices; the

CIP services voice, telephony, audio 3.1 and fax G2/G3
are supported

four LAN ports via RJ45 sockets
(standard Ethernet, 10/100 base-T)

one USB host controller (USB version 1.1)

WLAN

WLAN Access Point with support for radio networks in
accordance with IEEE 802.11b (11 MBit/s) and
IEEE 802.11g (54 MBit/s); the 802.11g++ standard is
also supported and can be used in combination with a
compatible WLAN adapter

F!BoxFonWLAN-7170v2-e.book Seite 136 Freitag, 23. November 2007 3:41 15

Summary of Contents for Fritz!Box Fon WLAN7170













































































































































Search results

Summary of Contents for Fritz!Box Fon WLAN7170

Reviews:

Related manuals for Fritz!Box Fon WLAN7170

Brands by name

Popular brands

AVM Fritz!Box Fon WLAN7170, Installation, Configuration And Operation

Search results

Summary of Contents for Fritz!Box Fon WLAN7170

Reviews:

Related manuals for Fritz!Box Fon WLAN7170

Brands by name

Popular brands