Configuration and Operation by Telephone
94
FRITZ!Box Fon WLAN 7170 – 11 Configuration and Operation by Telephone
11
Configuration and Operation by
Telephone
Many of the FRITZ!Box Fon WLAN functions and features can
be configured and used over a telephone connected to a
FRITZ!Box Fon WLAN extension. Only tone-dialing (dual-tone
multifrequency = DTMF) telephones can be used in configu-
ration and operation. Pulse dialing telephones are not suit-
able.
The telephone network features can be used only if they are
supported by your telephone network carrier and enabled on
your telephone line.
Entries input on the telephone are confirmed with an ac-
knowledgement tone. Entries made correctly are confirmed
with a positive acknowledgement tone (a single tone of one
second in length). An error, such as an incorrect key se-
quence, is indicated by a failure tone, an intermittent tone at
intervals of about 0.25 seconds.
For more information on the audio signals, see the section
“Audible Signals” on page 134.
Designation of the Functions and Features
Functions and features whose application has direct effects
on the connection are marked with icons. The icons indicate
the connection types with which the function or feature can
be used or applied.
Functions and features that have no effect on the connection
are not marked.
An overview of all of the icons used in this chapter is pre-
sented in the section “Symbols and Highlighting” from
page 6 of this manual.
