manualshive.com logo in svg

AVM FRITZ!Box Fon WLAN, Installation And Operation Manual

Share
Download
AVM FRITZ!Box Fon WLAN Installation And Operation Manual Download Page 91

Removing the FRITZ!DSL Software

FRITZ!Box Fon WLAN 7170 – 10 Removing the FRITZ!Box Fon WLAN

91

10.2 Removing the FRITZ!DSL Software

If the FRITZ!DSL software package is installed on a computer
and you would like to remove it, perform an uninstallation
using the Windows Control Panel.

Removing FRITZ!DSL in Windows XP

Proceed as follows to remove the FRITZ!DSL software pack-
age in Windows XP:

1.

Open “start / Control Panel / Add or Remove Pro-
grams”.  Make  sure  that  the  “Change  or  Remove  Pro-
grams” button is selected in the column at left.

2.

Select the “AVM FRITZ!DSL” entry from the list of “Cur-
rently installed programs”.

3.

Click the “Change/Remove” button.

This concludes the removal of FRITZ!DSL.

Removing FRITZ!DSL in Windows 2000

Proceed as follows to remove the FRITZ!DSL software pack-
age in Windows 2000:

1.

Open “Start / Settings / Control Panel / Add/Remove
Programs”. Make sure that the “Change or Remove Pro-
grams” button is selected in the column at left.

2.

Select the “AVM FRITZ!DSL” entry from the list of “Cur-
rently installed programs”.

3.

Click the “Change/Remove” button.

This concludes the removal of FRITZ!DSL.

Summary of Contents for FRITZ!Box Fon WLAN














































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands