manualshive.com logo in svg

AVM FRITZ!Box Fon WLAN, Installation And Operation Manual

Share
Download
AVM FRITZ!Box Fon WLAN Installation And Operation Manual Download Page 28

Connecting to the Analog Telephone Line

28

FRITZ!Box Fon WLAN 7170 – 2 FRITZ!Box Fon WLAN 7170: Connecting

Connecting

1.

Connect the longer, gray end of the cable to the socket
labeled “DSL/TEL”, located at the far left of the back
panel of the FRITZ!Box Fon WLAN.

2.

Insert the black end of the Y-branch of the cable into the
socket of your ISDN NT.

2.9

Connecting to the Analog Telephone Line

You only have to connect the FRITZ!Box Fon WLAN with the
analog line if you have an analog line and want to use the
FRITZ!Box Fon WLAN for analog fixed-line telephony.

Connecting an analog telephone line to FRITZ!Box Fon WLAN

Cable

The gray and black Y-shaped cable is for connecting  to the
analog line. This cable is a combination of a DSL cable and a
telephone cable.

Summary of Contents for FRITZ!Box Fon WLAN














































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands