manualshive.com logo in svg

AVM FRITZ!Box Fon WLAN, Installation And Operation Manual

Share
Download
AVM FRITZ!Box Fon WLAN Installation And Operation Manual Download Page 22

Connecting to a Computer Wirelessly via WLAN

22

FRITZ!Box Fon WLAN 7170 – 2 FRITZ!Box Fon WLAN 7170: Connecting

Connecting FRITZ!Box Fon WLAN to a network hub

1.

Connect one end of the red LAN cable to the uplink port
of the network hub or switch.

2.

Connect the other end of the network cable to one of
the sockets on FRITZ!Box Fon WLAN labeled “LAN”.

2.6

Connecting to a Computer Wirelessly via 
WLAN

The FRITZ!Box Fon WLAN can be connected to a computer
wirelessly using WLAN.

The wireless WLAN connection is independent of the operat-
ing system used. Each computer to be connected to
FRITZ!Box Fon WLAN via WLAN must support WLAN by means
of a compatible WLAN adapter, for instance the AVM
FRITZ!WLAN USB Stick.

For more information on WLAN, see the chapter “WLAN: Wire-
less Local Area Network” from page 55.

Summary of Contents for FRITZ!Box Fon WLAN














































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands