manualshive.com logo in svg

AVM FRITZ!Box Fon WLAN, Installation And Operation Manual

Share
Download
AVM FRITZ!Box Fon WLAN Installation And Operation Manual Download Page 21

Connecting to a Network Hub or Network Switch

FRITZ!Box Fon WLAN 7170 – 2 FRITZ!Box Fon WLAN 7170: Connecting

21

Connecting

1.

Remove the network cable from the package.

2.

Switch on your computer.

If you work with a Linux operating system, use YaST to
configure your network card with the setting “DHCP”, if
this setting is not already configured.

3.

Insert one end of the LAN cable to the computer’s net-
work adapter.

4.

Connect the other end of the LAN cable to a socket on
the FRITZ!Box Fon WLAN labeled “LAN1”, “LAN2”,
“LAN3” or “LAN4”.

No additional driver installation is necessary on the comput-
er.

Connecting More Computers to the LAN Ports

Additional cables are required to connect further computers.
In purchasing a LAN cable, note the instructions in the sec-
tion “Cables and Sockets” from page 135.

You can connect a computer to any of the four LAN ports of
the FRITZ!Box Fon WLAN at any time.

Connecting to a Network Hub or Network 
Switch

You can connect a network hub or switch to the LAN port if
you would like to connect multiple computers to the
FRITZ!Box Fon WLAN via LAN.

Summary of Contents for FRITZ!Box Fon WLAN














































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands