AVM FRITZ!Box Fon WLAN Installation And Operation Manual Download Page 141

Page: 141 / 141

FRITZ!Box Fon WLAN 7170 – Declaration of CE Conformity

141

Declaration of CE Conformity

herewith declares that the product

complies with the following directives:

The following norms were consulted to assess conformity:

EN 60950-1:2001/A11

CTR 3/1998.06.17

ETSI TS 101 388

ITU-T G.992.1

ITU-T G.992.5

ITU-T G.994.1

ETSI ETR 328

EN 301 489-17 V1.2.1 (2002)

EN 301 489-1 V1.5.1 (2004)

EN 55024/9.98 + A1/10.01 + A2/01.03

EN 300 328 V1.6.1 (11.2004)

The CE symbol confirms that this product conforms with the above mentioned
norms and regulations.

Indication of Countries

This device is designed for use in all countries of the European Union and in Swit-
zerland, Norway and Iceland. In France only indoor operation is permitted.

The manufacturer

AVM GmbH

Address

Alt-Moabit 95

D-10559 Berlin

Product

FRITZ!Box Fon WLAN 7170

Type

ADSL WLAN router

1999/5/EC

R&TTE Directive: Radio Equipment and Telecommuni-
cations Terminal Equipment

89/336/EEC

EMC Directive:
Electromagnetic Compatibility

73/23/EEC

Low Voltage Directive:
Electrical equipment designed for use within certain
voltage limits

Berlin, 01/08/2006

Peter Faxel, Technical Director

Summary of Contents for FRITZ!Box Fon WLAN














































































































































Search results

Summary of Contents for FRITZ!Box Fon WLAN

Reviews:

Brands by name

Popular brands

AVM FRITZ!Box Fon WLAN, Installation And Operation Manual

Search results

Summary of Contents for FRITZ!Box Fon WLAN

Reviews:

Brands by name

Popular brands