manualshive.com logo in svg

AVM FRITZ!Box Fon WLAN, Installation And Operation Manual

Share
Download
AVM FRITZ!Box Fon WLAN Installation And Operation Manual Download Page 133

Product Details

FRITZ!Box Fon WLAN 7170 – 13 Product Details

133

13

Product Details

This chapter provides you with product details on FRITZ!Box
Fon WLAN. You receive detailed technical data and informa-
tion on the LEDs.

13.1 FRITZ!Box Fon WLAN LEDs

The LEDs on your FRITZ!Box Fon WLAN indicate the following
conditions:

LED

Meaning

Power/DSL

on

FRITZ!Box Fon WLAN ready for operation;
power supply is connected and the DSL
line is ready for operation

flashing

The device is connected to the power
mains, but the connection to DSL has
been lost

Internet

on

a telephone connection to the Internet is
active

flashing

there are messages in your mailbox (this
function must be supported by your Inter-
net telephony provider)

Fixed Line on

a telephone connection to the fixed-line
network is active

flashing

there are messages in your mailbox (this
function must be supported by your Inter-
net telephony provider)

WLAN

on

the WLAN function is enabled

flashing

the WLAN function is being enabled or dis-
abled

INFO

on

a telephone connection between two In-
ternet telephony subscribers is active, the
call is free of charge (this feature must be
supported by your Internet telephony pro-
vider)

flashing

the value specified for the online meter
has been reached
firmware is being updated

Summary of Contents for FRITZ!Box Fon WLAN














































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands