Group Call
100
FRITZ!Box Fon WLAN 7170 – 11 Configuration and Operation by Telephone
Group Call
The FRITZ!Box Fon WLAN Group Call feature allows you to ring
all other extensions at the same time. To do so, you must
first configure the extension for internal dialing. Your call is
connected with whichever extension answers first.
Alternating Between Calls
Whenever you have one active connection and one caller on
hold, you can switch from one call to the other as often as
you want using the Hold button.
To alternate between two connections, proceed as follows:
N
Pick up the handset.
9
Instead of an extension number, dial “9”. All ex-
tensions that are not busy ring.
Call 1
P
You are talking to Caller 1.
R
Press the Hold button. Caller 1 is now on hold.
M
To establish a second call, simply dial either the de-
sired extension number or the outside line access
“0” followed by the desired external number.
Call 2
P
If the call is answered, you can consult on this line.
The original caller is still on hold.
R2
To switch back from Caller 2 to Caller 1, dial the se-
quence shown at left.
Call 1
P
Caller 1 is now active again and Caller 2 is on hold.
R2
To switch back again from Caller 2 to Caller 1, dial
the same sequence. In this way you can alternate
between the two connections.
