AVM FRITZ!Box Fon WLAN 7113 Installation, Configuration And Operation Download

Page: 73 / 122

WLAN Button

FRITZ!Box Fon WLAN 7113

1.3

WLAN Button

The FRITZ!Box is equipped with a WLAN switch on its rear
panel.

The WLAN button can be used to enable and disable WLAN.

1.4

Technical Specifications

Ports and Interfaces

DSL/Telephone port

–

DSL modem in accordance with the standard ITU
G.992.1 Annex A, ITU G.992.3 Annex A (ADSL2),
ITU G.992.5 Annex A (ADSL2+), ITU G.994.1 (G.hs)

–

telephone port for connecting to the analog
network

two a/b ports for connecting two extensions via RJ11
sockets

one LAN port via RJ45 sockets (standard Ethernet,
10/100 base-T)

WLAN

WLAN access point with support for radio networks in
accordance with IEEE 802.11b (11 Mbit/s) and IEEE
802.11g (54 Mbit/s). The IEEE 802.11g++ standard is
also supported and can be used when a compatible
WLAN adapter is installed.

Router Function

DSL router

DHCP server

Firewall with IP masquerading/NAT

User Interface and Display

Settings and status messages via a web browser on a
connected computer

Five LEDs indicate the condition of the device

Summary of Contents for FRITZ!Box Fon WLAN 7113



























































































































Search results

Summary of Contents for FRITZ!Box Fon WLAN 7113

Reviews:

Related manuals for FRITZ!Box Fon WLAN 7113

Brands by name

Popular brands

AVM FRITZ!Box Fon WLAN 7113, Installation, Configuration And Operation

Search results

Summary of Contents for FRITZ!Box Fon WLAN 7113

Reviews:

Related manuals for FRITZ!Box Fon WLAN 7113

Brands by name

Popular brands