AVM FRITZ!Box Fon WLAN 7113 Installation, Configuration And Operation Download Page 23

Page: 23 / 122

Opening the User Interface

FRITZ!Box Fon WLAN 7113

Opening the User Interface
fritz.box

The FRITZ!Box has a user interface that can be used in a web browser.

The user interface presents information about the FRITZ!Box product,
terminals and connections. This is where you configure all of the set-
tings for operating the FRITZ!Box.

The user interface can be opened from any computer con-
nected with the FRITZ!Box. The settings you configure are
saved in the FRITZ!Box.

Starting

Start a web browser on your computer.

Enter “

fritz.box”

in the address line of the browser.

The “

fritz.box”

address entry in the address field of an Internet

browser

The FRITZ!Box user interface opens.

4.1

Password Protection

Use the password protection set up for the user interface
to protect your settings and all information in the
FRITZ!Box from unauthorized access.

Here is how to set up the password protection in the
FRITZ!Box:

Open the FRITZ!Box user interface.

Select “Advanced Settings / System / FRITZ!Box
Password” in the FRITZ!Box Settings” area.

Enable password protection and enter a password.

Save your settings by clicking “Apply”.

If the user interface does not open, please see the in-
structions in the section “Errors Opening the User Inter-
face” on page 53.

Summary of Contents for FRITZ!Box Fon WLAN 7113



























































































































Search results

Summary of Contents for FRITZ!Box Fon WLAN 7113

Reviews:

Related manuals for FRITZ!Box Fon WLAN 7113

Brands by name

Popular brands

AVM FRITZ!Box Fon WLAN 7113, Installation, Configuration And Operation

Search results

Summary of Contents for FRITZ!Box Fon WLAN 7113

Reviews:

Related manuals for FRITZ!Box Fon WLAN 7113

Brands by name

Popular brands