AVM FRITZ!Box 7590AX, Manual

Page: 144 / 288

Obtaining an IP Address Automatically
Overview
Network devices that are to obtain their IP address automatically by
DHCP must be configured accordingly. This configuration is performed
on the operating system level in the IP settings of the network devices.
Obtaining an IP Address Automatically in Windows
1. In Windows 10, click on “Start”.
In Windows 8, press the Windows key and the Q key at the same
time.
2. Enter “ncpa.cpl” in the search field and press Enter.
3. Click on the network connection between the computer and the
FRITZ!Box with the right mouse button and select “Properties”.
4. Under “This connection uses the following items”, select
“Internet Protocol Version 4 (TCP/IPv4)”.
5. Click on the “Properties” button.
6. On the “General” tab, enable the options “Obtain an IP address
automatically” and “Obtain DNS server address automatically”.
7. Save with “OK”.
8. Enable the options “Obtain an IP address automatically” and
“Obtain DNS server address automatically” for the internet proto-
col version 6 (TCP/IPv6) as well.
The network device receives an IP address from the FRITZ!Box.
FRITZ!Box 7590 144
User Interface: Home Network Menu
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •