AVM FRITZ!Box 7360 Installation, Configuration And Operation Download

Page: 31 / 180

The FRITZ!Box User Interface

The FRITZ!Box has a user interface you can open in a web browser on
your computer.

In the user interface you can set up the FRITZ!Box, enable or disable
functions and receive information on the FRITZ!Box and on your con-
nections.

5.1

Opening the User Interface

The FRITZ!Box user interface can be opened on every comput-
er connected with the FRITZ!Box.

Start a web browser on your computer.

Enter

fritz.box

in the address line of the browser.

The FRITZ!Box user interface opens.

Entering the address

fritz.box

in the browser

The Wizard: Opening the User Interface for the First Time

When you open the user interface for the first time, a wizard
starts to assist you in configuring the FRITZ!Box.

If you cancel the wizard, you can configure your FRITZ!Box
without this wizard. You can change the settings configured
with this wizard at any time.

For comprehensive information on configuring the many di-
verse functions of your FRITZ!Box, see the following chapters
in this manual.

If the user interface does

not

open, see the instructions on

resolving errors in the section from

page 118

FRITZ!Box_7360-en.fm Seite 31 Mittwoch, 15. Februar 2012 5:21 17

Summary of Contents for FRITZ!Box 7360





















































































































































































Search results

Summary of Contents for FRITZ!Box 7360

Reviews:

Related manuals for FRITZ!Box 7360

Brands by name

Popular brands

AVM FRITZ!Box 7360, Installation, Configuration And Operation

Search results

Summary of Contents for FRITZ!Box 7360

Reviews:

Related manuals for FRITZ!Box 7360

Brands by name

Popular brands