AVM FRITZ!Box 7360 Installation, Configuration And Operation Download

Page: 137 / 180

Taking FRITZ!Box out of Operation

137

Taking FRITZ!Box out of Operation

In this chapter you receive tips and recommendations for taking the
FRITZ!Box out of operation.

20.1

FRITZ!Box Restoring the Factory Settings

Restore the factory settings of the FRITZ!Box. This is strongly
recommended if you are planning to pass the FRITZ!Box on to
another user.

Resetting the FRITZ!Box has the following effects:

•

All settings you made in the FRITZ!Box are then deleted.

•

The factory settings’ WLAN key will be activated again.

•

The IP configuration of the factory settings will be re-
stored.

Restoring Factory Settings

In the FRITZ!Box user interface, select the “System / Re-
set” menu.

On the “Factory Settings” page, click the “Load Factory
Settings” button.

The FRITZ!Box is reset to its factory settings.

Please also follow our instructions for the correct disposal of
waste equipment on

page 154

FRITZ!Box_7360-en.fm Seite 137 Mittwoch, 15. Februar 2012 5:21 17

Summary of Contents for FRITZ!Box 7360





















































































































































































Search results

Summary of Contents for FRITZ!Box 7360

Reviews:

Related manuals for FRITZ!Box 7360

Brands by name

Popular brands

AVM FRITZ!Box 7360, Installation, Configuration And Operation

Search results

Summary of Contents for FRITZ!Box 7360

Reviews:

Related manuals for FRITZ!Box 7360

Brands by name

Popular brands