Configuring Up Telephony Devices
33
Devices Integrated in the FRITZ!Box
•
Fax reception
–
fax ID to be transmitted to the sender of the fax
–
e-mail address to which the received faxes are for-
warded
–
USB memory on which the received faxes are stored.
For this option a USB memory device must be con-
nected to the USB port of the FRITZ!Box.
•
Answering Machine
–
Specifications about how calls should be accepted,
and whether the message should also be sent by e-
mail.
–
internal name for the answering machine
–
Call acceptance: Enter here whether the answering
machine should react to all calls or only to calls for
certain numbers.
–
Remote inquiry, which can be used to pick up mes-
sages from the answering machine from another tele-
phone line.
Configuring an IP Telephone in FRITZ!Box
If you connected an IP telephone to the FRITZ!Box, you still
have to set up the telephone in the FRITZ!Box user interface.
Then you can use the IP telephone to make calls.
1.
Open the FRITZ!Box user interface (see the section
Opening the User Interface on page 26
2.
Select “System / Expert Mode”. Enable the expert
settings and click “Apply”.
3.
Select “Wizards / Manage Telephony Devices” and then
click “Next”.
4.
Select the option “Telephone” and then click “Next”.
5.
Select the “LAN/WLAN (IP telephone)” port and then
click “Next”.
