AVM FRITZ!Box 6360 Cable Installation, Configuration And Operation Download Page 23

Page: 23 / 164

Connecting an ISDN PBX

3.8

Connecting an ISDN PBX

If you have an ISDN PBX, you can connect this PBX to the
FRITZ!Box. With the telephones connected to the PBX you can
make calls in the usual fashion.

Connecting an ISDN PBX to the FRITZ!Box

Connecting

Use an ISDN cable to connect an ISDN PBX.

Connect one end of the ISDN cable with the ISDN PBX.

Connect the other end of the ISDN cable with the
“FON S

” port of the FRITZ!Box.

3.9

Connecting an IP Telephone

With your FRITZ!Box 6360 Cable you can even use IP tele-
phones to make calls over the Internet. IP telephones are con-
nected to the FRITZ!Box via LAN or WLAN.

Connecting to a LAN Port

At the LAN ports of the FRITZ!Box you can connect IP tele-
phones using a LAN cable.

The ISDN PBX must support a point-to-multipoint line.

CABLE

Power/Cable

Fon

DECT

WLAN

Info

able

If you have no more than two analog devices connected
to the PBX, you can connect them directly to the
FRITZ!Box and do without the PBX.

Summary of Contents for FRITZ!Box 6360 Cable





































































































































































Search results

Summary of Contents for FRITZ!Box 6360 Cable

Reviews:

Brands by name

Popular brands

AVM FRITZ!Box 6360 Cable, Installation, Configuration And Operation

Search results

Summary of Contents for FRITZ!Box 6360 Cable

Reviews:

Brands by name

Popular brands