140
Push-Service Mail
7.3
Push-Service Mail
With push service you can specify that the FRITZ!Box sends
you e-mail messages with status and consumption data at
regular intervals.
The e-mail contains a table with the overview of your
FRITZ!Box connections.
The call list is also sent as a file in csv format. The file can
then be opened and evaluated statistically with appropriate
software like a spreadsheet program.
The push service mail is set up in the “System / Push
Service” menu.
7.4
Night Service
In the FRITZ!Box you can set up night service for WLAN and for
the telephones connected to the FRITZ!Box.
Configure night service using the menu command “System /
Night Service”.
First define the period of time for which the night service of
the FRITZ!Box should be active. For instance, from 10:00 p.m.
to 6:00 a.m.
The function must be enabled after you specify the settings.
Configure the night service for wireless network
On the “WLAN” page you may turn off the wireless network
during the same period of time each day or define individual
schedules fpr each weekday.
Do Not Disturb
When this setting is selected, the telephones connected with
the FRITZ!Box will not ring during night service.
IP telephones are an exception: They are connected with the
FRITZ!Box either by means of a network cable or via WLAN.
The Do Not Disturb setting is not applied to IP telephones.
If you connected a fax machine to the FRITZ!Box, this device is
disabled during night service.
