manualshive.com logo in svg

AVM Fritz!Box 3390, Configuration And Operation Manual

Share
Download
AVM Fritz!Box 3390 Configuration And Operation Manual Download Page 62

FRITZ!Box 3390

62

Using the Automatic Search for Updates

Performing a Firmware Update

1.

Open the FRITZ!Box user interface (see 

page 29

).

2.

Enable the advanced view.

3.

Select “System > FRITZ!OS Update > Firmware File”.

4.

Click the “Save Settings” button to save the current set-
tings of your FRITZ!Box on your computer and save the 
export file on your computer.

A prerequisite for loading a new firmware file is that your 
current FRITZ!Box settings have been saved in a backup 
file. Using this file you can restore the settings of your 
FRITZ!Box as needed.

5.

Click the “Browse...” button and choose the file with the 
new firmware you already downloaded and saved on 
your computer.

6.

Click the “Start Update” button.

The new firmware is transmitted to the FRITZ!Box.

The firmware update is complete when the “Info” LED stops 
flashing.

10.4

Using the Automatic Search for Updates

With the AVM service “Search for updates automatically” you 
will always be informed about the latest FRITZ!OS  updates for 
your FRITZ!Box: When a new firmware for your FRITZ!Box was 
found, you will be notified on the “Overview” page. From here 
you can then install the update.

Never clear the connection between FRITZ!Box and the 
computer during a firmware update, and do not unplug 
the power cord, as interrupting the firmware update 
could damage your FRITZ!Box.

New updates are not installed automatically.

Summary of Contents for Fritz!Box 3390






















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands