manualshive.com logo in svg

AVM Fritz!Box 3390, Configuration And Operation Manual

Share
Download
AVM Fritz!Box 3390 Configuration And Operation Manual Download Page 23

Connecting Computers over Wireless LAN

FRITZ!Box 3390

23

Establishing a Wireless LAN Connection Using WPS

The FRITZ!Box supports WPS (Wi-Fi Protected Setup). Wireless 
devices that also support WPS can be connected with your 
FRITZ!Box securely using this method. All of the necessary 
wireless LAN security settings are transferred in the process. 
There are two kinds of WPS: the push-button method and the 
PIN method.

WPS with the Push-Button Method

The push-button method (WPS PBC) can be used if your wire-
less LAN device is equipped with a WPS button, or if WPS can 
be enabled via the control software of the wireless LAN de-
vice.

1.

Briefly press the  “WPS” button of the FRITZ!Box.

2.

When the “WLAN” LED flashes, start WPS on the wireless 
LAN device. You have two minutes for this task.

How to start WPS depends on the wireless LAN device. 
Either press a button on the wireless LAN device, or start 
WPS in the device's control software.

The connection between the FRITZ!Box and the computer is 
established automatically. The computer is now connected 
with the FRITZ!Box. 

WLAN

WPS

Po

we

r

LAN

WLAN

DSL

Inf

o

LANLAN

DSLDSL

InfoInfo

Summary of Contents for Fritz!Box 3390






















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands