manualshive.com logo in svg

AVM Fritz!Box 3390, Configuration And Operation Manual

Share
Download
AVM Fritz!Box 3390 Configuration And Operation Manual Download Page 22

FRITZ!Box 3390

22

Connecting Computers over Wireless LAN

5.2

Connecting Computers over Wireless LAN

Using wireless LAN radio technology you can connect multi-
ple computers with the FRITZ!Box wirelessly. 

Please note the following before establishing a wireless con-
nection between the computer and the FRITZ!Box:

•

Wireless device

A computer to be connected to the FRITZ!Box via wireless 
LAN must support this technology. This means it must be 
equipped with a wireless LAN device. A wireless LAN 
device can be an external wireless LAN adapter—like a 
USB stick, for example—or a device integrated in the 
computer. Many modern computers and notebooks 
come with a wireless LAN device integrated.

•

Wireless LAN security settings

In the FRITZ!Box, wireless LAN security settings are en-
abled upon delivery. Before a computer can establish a 
wireless connection to the FRITZ!Box, the wireless LAN 
security settings of the FRITZ!Box must be transferred to 
the wireless LAN device.

For this procedure the FRITZ!Box supports two automatic 
methods, AVM Stick & Surf and WPS (Wi-Fi Protected 
Setup). The security settings can also be transferred 
manually.

For more information on wireless LAN, see the section 

FRITZ!Box as a Wireless Access Point 

from 

page 80

.

Summary of Contents for Fritz!Box 3390






















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands