background image

FRITZ!Box 3390

12

Security and Handling

for the wireless LAN connection to tablets, smartphones 
and computers:

Tablets, smartphones or computers that support wire-
less LAN compliant with IEEE 802.11n, IEEE 802.11g, 
IEEE 802.11a, or IEEE 802.11b. Computers that do not 
have wireless LAN integrated can be equipped with wire-
less LAN support by installing a wireless LAN device like 
a FRITZ!WLAN USB Stick, for instance. 

for connecting computers using network cable:

computer with a network port (network adapter standard 
Ethernet 10/100/1000 Base-T)

3.3

Security and Handling

Before installing and using the FRITZ!Box, please read the fol-
lowing security and handling instructions.

Safety Instructions

Avoid overloading power outlets, extension cables and 
socket strips. Overloaded power supply components 
present a fire and electrocution risk.

Avoid using socket strips and extension cords if at all 
possible.

Do not connect multiple extension cords or socket 
strips to each other.

Before mounting the FRITZ!Box on the wall, make sure 
that there are 

no

 electrical lines, gas or water pipes lo-

cated where you need to drill the holes.

If necessary, check the site with a pipe detector or con-
sult with qualified experts.

When connecting the FRITZ!Box 3390, be sure to observe the 
following security instructions in order to protect yourself 
and the FRITZ!Box from harm.

Summary of Contents for Fritz!Box 3390






















































































































































Reviews: