iDirect Modem
AvL Technologies
| Proprietary – Content is Subject to Change without Notice
3
Setup Guide
2.
2.1.
Hardware
iDirect Modem
o
Evolution X3
o
Evolution X5
o
Evolution X7
o
Evolution 8000 Series
AvL AAQ Antenna System
2.2.
Software
Ensure that the Remote Client, ROM, and device module are at or above the versions shown in Figure 1:
Figure 1 – Version Info
Note: It is recommended that older iDirect modems should be upgraded to software version iDX 3.5.
2.3.
Hardware Connection
Connect the AAQ antenna controller to the iDirect modem through the desired means. The AAQ controller supports
serial (RS232) and Ethernet communications to the iDirect modem and can be configured to use either depending on
the necessary networking scheme.
