IntelliTrack Module
Operations Guide
AvL Technologies
| Proprietary – Content is Subject to Change without Notice
pg. 19
cycles will now only be performed at key points in the predicted path to maintain an up to date
model.
Note that the IntelliTrack tracking algorithm cannot perform correctly with data that has been
gathered before the sensors have been initialized or with an inaccurate terminal heading.
Note – Any time a step track failure occurs a spiral scan will be performed in an
attempt to find the target. If three successive step track failures occur tracking will
stop.
4.2. Sensor outputs
To view the IntelliTrack Module Sensor Output variables login as a valid user, go to View
->Sensor Output, and type ‘IntelliTrack” into the keyword search window.
Path
Main Window → View → Sensor Output
Level 0
Figure 13 - Sensor Output, Search IntelliTrack
