26
Configuring a WiFi Client Interface
By default, the WiFi network is disabled. Make sure it is enabled. If not, see
Enabling/Disabling the WiFi Interface
From the Unit Panel
1.
From the Home menu, turn the wheel to select
.
2.
Press the wheel to confirm.
3.
Turn the wheel to select the WiFi configuration.
4.
Press the wheel to confirm.
5.
Turn the wheel to select the Mode field.
6.
Press the wheel to access the selection list for the WiFi
mode.
7.
Turn the wheel to select the Client mode.
8.
Press the wheel to confirm.
The client mode is activated.
9.
You can set the network link priority (High or Low).
a)
Turn the wheel to select priority field.
b)
Press the wheel to access the priority selection.
c)
Turn the wheel to select High or Low priority.
d)
Press the wheel to confirm your choice.
10.
You have 2 possibilities to configure a client interface.
•
Selecting a network among the ones identified around.
•
Adding manually a hidden network.