Page 7 of 18
4.1
Ventilation Requirements
For good ventilation keep enough space between the side walls and your Freezer. Its
back needs to be at least 50mm away from the wall, its sides at least 25mm separately
and the height from over its top is not less than 50mm.
Gently push the Freezer into place, ensuring that the back of the
freezer maintains a gap of 50mm from the wall.
When in position a 50mm clear space above the appliance should
ideally be maintained.
If insufficient space is available above the freezer, a clearance of
25mm should be maintained on both sides.
Ensure that the appliance does not stand on the electrical supply cable.
Whenever possible , the back of the appliance should be close to a wall, leaving the
required distance for ventilation.
4.2 Installation Steps
Select a safe place to install your Freezer.
The appliance should be level during use.
To eliminate rocking:
Ensure the appliance is upright and both adjusters are in firm contact with the floor so
that the cabinet is level.
Adjust the level by screwing out the appropriate level adjuster at the front ( use your
fingers or a suitable spanner).
This appliance is heavy. Care should be taken when moving it.
Install the parts in their correct position.
Check that the door is completely closed.
