AVIRE AC-3CM10-620-F-20-000 Installation Manual Download Page 1

1

DCP

Digital Communication Platform

 

Installation Guide

Ref No MU7756XAV10A-AU

Part numbers:

3G DCP (RS232): 

AC-3CM10-620-F-20-000

4G Single SIM card (RS232):

 AC-4CM10-620-F-20-000

4G Dual SIM card (RS232): 

AC-4CM10-820-F-20-000

PRODUCT DESCRIPTION

The Digital Communications Platform (DCP) provides an information gateway between 
all compatible connected Avire devices in the lift shaft and our online monitoring 
platform the Avire Hub. The product is installed as a stand-alone device and doesn’t 
require connection to the controller panel. 

Dual SIM card DCP version only:

 A dual SIM card version allows switching from one SIM 

to another in case the connection is lost. The dual SIM card version also allows the use 
of one SIM card for voice and the other one for data only. 

In the Box

 

+

4G DCP (either single or dual version) 

OR

 3G DCP

 

+

Antenna

 

+

P-5 H-2V connector (x1)

 

+

P-3.5 H-4V connector (x1)

 

+

P-10 H-2V connector (x1)

 

+

Grey clamp (x2)

 

+

Manual

Not Included

 

+

Screwdriver

 

+

SIM card/s

Summary of Contents for AC-3CM10-620-F-20-000





















Reviews: