1
1. Fast Installation
1.1 Camera Interface Illustration
Figure 1.1 AV-1362U
1.
Camera lens
2.
Camera base
3.
Remote Controller Receiver light
4.
Bottom DIP switch
5.
Tripod screw hole
6.
Installation Orientation Hole
7.
RS232 control interface (input)
8.
10/100M Network interface
9.
DVI-I interface (including HDMI signal)
10.
USB3.0 interface
11.
DC12V Input Power Supply Socket
12.
Power indicator
1.2 Power On
1) Power on: connect DC12V power supply adapter with NO.15 showed in Figure1.1.
2) Initialization: power on with power indicator light on and remote control receiver light blinking. Camera head
moves from bottom left to the central bottom, and then go to HOME position (intermediate position of both
horizontal and vertical), while the camera module initializes. When remote control receiver light stops blinking,
self-check is finished.
3)
Note:
If preset 0 is set, the camera automatically moves to the preset 0 position upon powering on.
1.3 Video output
AV-1362U has 3 options for video output: LAN, DVI, and USB3.0.
1) Video output from LAN.
a.
Network cable connection port: AV-1362U- No.8 in Figure1.1.
b.
Webpage Login: open your browser and enter 192.168.5.163 in the address bar (factory default); press Enter to
enter the login page; click on the “player is not installed, please download and install!" and follow the
installation instructions for installation. Then enter the user name
admin
and password
admin
(factory default);
press Enter to enter the preview page. Users can perform PTZ control, video recording, playback,
configuration and other operations.
2)
DVI (HDMI) video output
a. DVI (HDMI) video cable connection: AV-1362U- No.9 in Figure1.1.
