Ref#92550216001
Power Cable Input:
The Power Input is found on the back
of the device.
Power Output
The Power output is on the top of the
device. Simply plug in the device that
you would like to power control.
(Comes in different plug standards)
RJ45 Ethernet:
Plug in the RJ45 Ethernet cable to the
Ethernet port
RESET
To revert to manufacturer default, hold
down for 7-9 seconds until you hear 2
long beeps.
Status Indicator
Red Status Indicator
: Output port is
set to off
Green Status Indicator
: Output is On
3.) Interface Description
Hardware Interface
- 9-